prod_id=5469 CA: RPI EXHAUST - 5 SERIES F10 M5 GTM
Tel: 00 44 (0)1202 822 792
Monday - Friday, 10am - 7pm
[email protected]


-WE SHIP WORLDWIDE; 15% DISCOUNT ON LIST PRICES FOR ORDERS OUTSIDE EUROPE UNION.
-WE WILL BEAT ANY OTHER GENUINE QUOTE ! TRY US
Product Details
RPI EXHAUST - 5 SERIES F10 M5 GTM
£3,318.69 inc. VAT
Product Code: rpiegf10m5gtm



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
Ref: RPI-EGF10M5-GTM

The RPi F10 M5 is the official "BAD BOY" of Race Precision line of exhausts for this M5.
The GTM offers an aggressive sound but also has minimal drone (dependent on driving style) and come with RPi's Limited Lifetime Warranty.
Expect a 15-23hp gain.

System includes/features:
- T304 SS - RPi hybrid X pipe
- Hand Crafted Muffler
- RPi Limited Lifetime Warranty and 100% made in the USA
- New Bottom Support Brace/Bracket

PLEASE NOTE : Prices can vary according to Global currency exchange rates, so please contact us if you see same item cheaper, we will beat any other quote !

BMW F10 Exhaust Installation - RPi GT/GTS/GTM Exhaust
RPi Exhaust Installation For BMW F10 M5 GT and GTS Systems

Tools Needed:
- 11mm socket
- 13mm socket
- 16mm socket
- 12mm socket
- 15mm socket
- 1/4 screw (x2) to plug up stock vacuum line

Apprx Install Time: 1.5hr

Remove stock exhaust. You will not need the nuts that hold the stock cross braces (there is one up front by the transmission and one in the rear, behind the differential). Once the stock exhaust is removed, please follow the diagram below for exhaust assembly. There are brackets near the rear axle (where ground wires are) that need to be reversed to fit the RPi exhaust. There are single brackets at each muffler (bolt to the chassis) that need to be reversed as well.

Installation/Alignment tip: Do not tighten the exhaust to the front flange/downpipe, do not tighten the v-band and band clamps that hold the exhaust together BEFORE lining up the exhaust. Make sure the exhaust is fully installed and aligned before starting to tighten up clamps and bolts to flanges.

WARNING: **Do NOT over tighten BOLTS or clamps! Vband clamp nuts should only be hand tightened***


Estimated Volumetric Shipping Weight : 20.00 Kg
 




© 2019    Site Maintenance by C2G Ltd